Backflip’s Engineering drawing to CAD tool turns an existing 2D engineering drawing into a 3D CAD model with a feature tree built from standard CAD operations.

This guide walks you through uploading your first drawing, starting a reconstruction, and inspecting and downloading the result as a STEP file in the Backflip web app, or rebuilding it as a natively in your CAD software using any of our supported CAD plugins.

Starting an engineering drawing reconstruction job

Before you begin, sign in to Backflip and have an engineering drawing ready to upload. This example uses a PNG image of a hand-drawn keyed flywheel.

keyed flywheel.png

Choose a drawing with readable dimensions and clear views of the part. Include the views and section details needed to fully describe its geometry.

1. Open the New Part dialog

Navigate to your Library and click the New part tile or the New button in the top-right corner. Both options are available from the main Library and from within any folder.

CleanShot 2026-10-30 at 10.14.58 AM@2x.png

2. Upload your drawing and choose Engineering drawing

In the New Part dialog, select Engineering drawing, then drag your drawing into the upload area or click the area to choose a file from your computer.

You can also upload a file before choosing the input type. Backflip limits the available input types to those compatible with the file you selected.

Tip: An image file can be used for either Photos or Engineering drawing. If you upload an image of an engineering drawing, make sure Engineering drawing is selected before converting it to CAD.

Review the uploaded drawing in the preview. Backflip uses the uploaded filename as the Part name but you can edit that name before starting the reconstruction.

For engineering drawings, each uploaded file becomes its own part. If you have an engineering drawing with multiple sheets, make sure all the sheets for that drawing are stored inside one PDF file.

CleanShot 2026-10-30 at 10.22.35 AM@2x.png

3. Start the reconstruction

Click Convert to CAD. Backflip uploads the drawing and creates a new part in your Library, then opens that part’s page.

The Files section contains both the original drawing and a CAD reconstruction entry. The CAD entry shows the reconstruction in progress while Backflip builds the model.

Wait for the reconstruction to finish before inspecting the result. The source drawing stays attached to the part so you can refer back to it.